Now that the decision is made to replace the old water heater, it pays to focus on how to get ready for the new Water Heater Installation in Bellingham WA. There are a few things the homeowner can do that will make the job go smoothly. Here are some examples of what to do before the professional shows up and gets to work.
Drain the Tank
Before the new Water Heater Installation in Bellingham WA can get underway, the old unit has to be removed. Speed up the process by shutting off the valve leading to the heater and drain the tank. Many models have a spigot located near the bottom of the tank. Attach a short hose to the spigot and open the tap. Allow the water to drain into some type of bucket or other container, then dump the water down the toilet. With the tank empty, it will take less time to disengage the old heater and move it out of the way.
Put Down Some Newspaper
Things can get a little messy during a new heater installation. The professional may have to go in and out of the house a couple of times. Use newspaper or old drop cloths to create a trail from the location of the heater to the front and back doors. Along with preventing dirt from getting on the carpet, the coverage will take care of any residual leakage that occurs when the old heater is hauled outside.
Clean the Space Around the Heater
If the water heater is in some type of enclosed cabinetry, take the time to get rid of the dust that has accumulated over time. Making sure the space is clean before the new heater goes into place will be to the benefit of everyone involved.
With the right tools and plenty of experience, it will not be long until the old heater is on the way to the junkyard and the new heater is providing a steady supply of hot water. You can also visit them on Facebook for more information.
