If the furnace trips its circuit breaker, homeowners shouldn’t simply switch the breaker back to the “on” position. That’s especially important if this happens more than once. A central heating unit has its own dedicated circuit, so it wouldn’t be possible to overload that circuit by plugging in an electrical device near the furnace. Calling for Furnace Repair in Watauga TX is the best solution. They can diagnose and fix the problem.
A dedicated circuit supplies power to only one device. That device uses so much electricity that the odds are high the breaker would trip if any other electrical equipment was attached to it. Refrigerators, electric ranges, clothes dryers and water heaters are some other appliances that have dedicated circuits.
When the circuit breaker for the furnace trips, one possibility is that the fan motor is working too hard. The furnace would have run for a while and then stopped. People in the house would notice a problem if someone had raised the thermostat temperature setting and the furnace had quit before reaching that temperature. They also would notice if the furnace had been running normally but then stopped and didn’t turn back on when the temperature started to drop. If someone does reset the breaker and the furnace starts up again, it will trip the breaker when the fan motor overheats due to overworking. The motor may be malfunctioning.
A very simple cause of an overworking fan motor is the air filter being completely clogged with dust, hair and debris. If the homeowner has been this lax about changing the filter regularly, it’s a good idea to have a technician from a company such as Blue Star Heating and Air clean and inspect the furnace. More information on this company can be found at the websit.
If the furnace has a short circuit, the breaker will trip when the appliance starts to run. This involves a hot bare wire touching another wire. It could cause a fire if the breaker didn’t automatically shut down the system. A technician who does Furnace Repair in Watauga TX can fix this electrical problem.
Join us here!
